Heavy Duty Patch Repair Kit.

5 x 470mm x 360mm Patches

5 x 360mm x 270mm Patches

5 x 260mm x 200mm Patches 

2 x Pangofol kits

1 x Hand roller 

1 x Wide hand roller 

1 x Scratch brush ( lighter hand buffing for rubber belting)

1 x 180mm copper disk x 36 Grift ( for heavy duty rubber buffing)

1 x Box of rubber crayons 

1 x 3.8 litre can of Bufsol cleaner 

1 x box (12) round glue brushes 

This is the perfect kit] for repairing holes and rips in your belt.

Start off cleaning the area with the cleaner, mark out position of the patch with the crayon, use the scratch brush or copper disk (variable speed grinder advised, to be buffed at low speed to avoid burning belt) to rough up the rubber, again clean the area from debris and any potential contaminants, then use a light 2nd coat on the belt let that dry to tacky, place the patch over the area and use the roller and make sure its rolled down well and theres no trapped air. Leave patch to cure if possible over night or at least a few hours.

We hold lots of different sized patches and filler repair strips, so you can always replenish this kit with different consumables to keep your belt running.