Conveyor Repair Kit with Milwaukee Safety Gloves + Glasses.

1 x Box PD5 Patches (10 in a box)

1 x Pangofol Kit

1 x Hand Roller

1 x Scratch Brush 

1 x Round Brush for Glue

1 x Locking Knife 

1 x Pack of Milwaukee Gloves Size 9 Level E

1 x Milwaukee Packout Bag 

This is the perfect kit for repairing holes and rips in your belt

Start off cleaning the area with the cleaner, mark out the position of the patch with the crayon, use the scratch brush to rough up the rubber, again clean the area from debris and any potential contaminants, paint patch and  belt area with the glue activated with the hardener, wait for the first coat to dry completely, then use a light 2nd coat on the belt let that dry to tacky, place the patch over the area and use the roller and make sure its rolled down well and theres no trapped air. Leave patch to cure if possible over night or at least a few hours.

We hold lots of different sized patches and filler repair strips,, so you can always replenish this kit with different consumables to keep your belt running.